Filmora's Auto Reframe only works on media before it goes onto the timeline, so it can't make a clip you've already placed follow a subject. You can rebuild the effect with motion tracking on a duplicate clip, then scale the top copy so the subject stays centered.
Stack a tracked copy to make the camera follow the subject
- Copy the clip you want to track and paste it directly above the original clip on the timeline. Both clips should sit in the same spot.
- On the bottom clip, open the Transform settings and set Rotate to 180 degrees, so the clip is upside down.
- Right-click the bottom clip and choose Create Compound Clip.
- Select the upside-down compound clip and turn on Motion Tracking. Place the tracking box on the subject you want the camera to follow, then run the track. Check the whole clip and adjust the box if it drifts off the subject.
- In the Link Element dropdown for the tracked clip, choose the clip on top.
- Select the top clip and change its Scale until the subject sits in the center of the frame. Leave the Position X and Position Y values alone.
- Select the upside-down compound clip and set its Opacity to 0%. The tracking still drives the top clip, but the flipped copy no longer shows.
- Select both clips, right-click, and choose Create Compound Clip again.
- Scale up the new compound clip until it fills the entire frame.
Play the clip back. The subject should stay centered as it moves.
If that doesn't work: keyframe the position and scale
If the tracking keeps losing the subject, you can move the clip by hand with keyframes. This takes longer, so use it when the subject moves in a simple path or when you only need a few points.
- Select the clip and move the playhead to the first frame where the subject should be centered.
- Adjust the Scale and Position until the subject sits in the middle of the frame. Click the keyframe button next to each setting so Filmora records the value at that point.
- Move the playhead forward to the next spot where the subject drifts off center.
- Adjust Position and Scale again to bring the subject back to center, and add keyframes at that point.
- Repeat until the whole clip is covered. Play it back and add more keyframes wherever the subject moves away from center.
FAQ
Why can't I find camera tracking for timeline clips in Filmora?
Auto Reframe only works on media before it goes onto the timeline. Stacking a tracked duplicate of the clip rebuilds the effect on the timeline.
Turn your raw videos into viral clips
edited for you by Magic Edit
Get Started